 |
 |
 |
 |
| Products > Thermocouples > 2T |
| STYLE 2T Element with Transition Fitting and Stainless Steel Overbraided Insulated Wire Leads* |
|
 |
|
|
|
Typical Sandelius "T" series thermocouple in remote mounted head application. Note the drip loop which should be lower than both the head and thermowell mounting fitting for proper water run off. Shielded PVC insulated wire part numbers "P4" or "P5" are often used in this type of application without the stainless steel armor. *NOTE: Normally the leadwires on dual element "2T" style assemblies are individually overbraided. If both leads are under a single overbraid specify style "2T1-". |
|
Element | Junction | Lead Wire | Termination Style Terminal Heads & Connector Blocks | Fittings & Accessories | Weld Pads |
|